Bhosari, Pune, Maharashtra
GST No. 27ACXPJ4321L3Z2
Call 08048989933 55% Response Rate
Minimum Order Quantity: 1 Piece
Product Brochure
Capacity | 100 Tons |
Platen Size | 500 x 500 mm |
Daylight Gap | 400 mm |
Machine Type | 4-Pillar Type |
No. of Station | Single |
Heating of Platens | Electrical Heater |
Stroke Length | 500 mm |
Motor Power | 11 kW |
Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.this is a150 MT fully automated compression and transfer moulding.this machine is malty fesility achine suitable for automotive metal to rubber bonding molding process.
Compression moulding necessitates the use of a blank (of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Applications:
Additional Information:
View Complete details
Product Brochure
Capacity | 70 Tons |
Platen Size | 12 x 12 Inch |
Machine Type | 4-Pillar Type |
No. of Station | Single |
No. of Daylight | One |
Heating of Platens | Electrical Heater |
Motor Power | 3 HP |
Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank (of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Applications:
View Complete details
Product Brochure
Capacity | 100 Tons |
Platen Size | 450 x 675 mm |
Daylight Gap | 575 mm |
Machine Type | 4-Pillar Type |
No. of Station | Single |
No. of Daylight | One |
Heating of Platens | Electrical Heater |
Stroke Length | 400 mm |
Motor Power | 7.5 kW |
Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank (of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Applications:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Capacity | 80 Tons |
Platen Size | 400 x 620 mm |
Daylight Gap | 550 mm |
Machine Type | 4-Pillar Type |
No. of Station | Single |
No. of Daylight | Two |
Heating of Platens | Electrical Heater |
Stroke Length | 400 mm |
Motor Power | 5.5 kW |
Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank (of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Additional Information:
View Complete details
Product Brochure
Capacity | 150 Tons |
Platen Size | 500 x 500 mm |
Daylight Gap | 400 mm |
Machine Type | 4-Pillar Type |
No. of Station | Single |
No. of Daylight | One |
Heating of Platens | Electrical Heater |
Stroke Length | 350 mm |
Bore Diameter | 250 mm |
Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank (of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Application:
Additional Information:
View Complete details
Product Brochure
Capacity | 50 Tons |
Daylight Gap | 425 mm |
Heating of Platens | Electrical Heater |
Stroke Length | 300 mm |
Motor Power | 5 HP |
Country of Origin | Made in India |
Compression moulding is a closed-mold process in which tremendous pressure is applied to the work. It's suitable for smaller items with low to medium production numbers where the tightest tolerances.
Compression moulding necessitates the use of a blank (of required shape, size, weight). Plays a key role in controlling mould flow rate to avoid air entrapment and excess flash.
A heated mould tool and the pressure of a clamping press are used to form the rubber. The curing or vulcanisation process takes place before the final portion is removed and cooled. An open mould with an elastomer blank positioned in the cavity is used in compression moulding. The final output consumable product is formed in a closed mould.
Applications:
View Complete details
Minimum Order Quantity: 1 Piece
Product Brochure
Brand | JKLHMP1001 |
Capacity | 40MT |
Material | rigid Steel cuntruction. |
Power Source | Electrical power supply |
Automation Grade | Automatic |
Surface Treatment | standerd surface heating technology |
Power Consumption | 3KW |
Weight | 750KG |
Stroke | 300mm |
Additional Information:
View Complete details